FixVault
Home › Toyota › 2012 › 4Runner SR5, 4WD › Repair and Diagnosis › Engine Performance › Testing & Diagnosis › Engine Control System (Service Information) › Accelerator Pedal › Removal › Removal

Accelerator Pedal: Removal: Removal

  1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY 
    1. Disconnect the accelerator pedal position sensor connector.
      Fig 1: Identifying Accelerator Pedal Sensor Nuts
      GTY332268Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 nuts and accelerator pedal sensor.
About FixVault