Window Defogger Wire: Repair: Repair
- REPAIR DEFOGGER WIRE
- Clean the broken wire tips with grease, wax and silicone remover.
- Place masking tape along both sides of the wire.
- Thoroughly mix the repair agent.
DuPont paste
No. 4817 or equivalent
TEXT IN ILLUSTRATION*a Repair Point *b Masking Tape *c Broken Wire - Using a fine tip brush, apply a small amount of the agent to the wire.TEXT IN ILLUSTRATION
*a Fine Tip Brush *b Repair Point - After a few minutes, remove the masking tape.NOTE:
Do not allow electricity to flow in the defogger wire for at least 24 hours.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002