FixVault
Home › Toyota › 2012 › 4Runner Trail › Repair and Diagnosis › Electrical › Starter › Starting System (Service Information) › Ignition Switch › Installation › Installation

Ignition Switch: Installation: Installation

  1. INSTALL IGNITION SWITCH ASSEMBLY 
    1. Attach the claw to connect the key interlock solenoid wire harness to the ignition switch.
    2. Install the ignition switch with the 2 screws.
    3. Connect the ignition switch connector and key interlock solenoid connector and attach the wire harness clamp.
  2. INSTALL LOWER STEERING COLUMN COVER  See step  3
About FixVault