FixVault
Home › Toyota › 2012 › Avalon Base › Repair and Diagnosis › Accessories & Equipment › Infotainment › Navigation System (Service Information) › Navigation Receiver › Installation › Installation

Navigation Receiver: Installation: Installation

  1. INSTALL NAVIGATION RECEIVER ASSEMBLY 
    1. Slide the navigation receiver assembly in the direction shown by the arrow to install the navigation receiver assembly.
      Fig 1: Installing Navigation Receiver Assembly
      GTY331836Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 2 RADIO BRACKET 
    1. Install the No. 2 radio bracket with the 4 bolts and 2 screws.
  3. INSTALL NO. 1 RADIO BRACKET 
    1. Install the No. 1 radio bracket with the 4 bolts and 2 screws.
  4. INSTALL INTEGRATION CONTROL AND PANEL WITH NAVIGATION RECEIVER ASSEMBLY 
    1. Connect each connector.
    2. Engage the 4 clips.
    3. Install the integration control and panel with navigation receiver assembly with the 4 bolts.
  5. INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL  . Refer to INSTALLATION - Step 37 .
About FixVault