VSC Buzzer Circuit: Procedure

1. Check if a CAN communication system DTC is output. Refer to DIAGNOSIS SYSTEM .

   Result

   Result	Proceed to
   DTC is not output	A
   DTC is output	B

B → See step   4 

A: Go to next step 

1. Check if a multiplex communication system DTC is output. Refer to DTC CHECK / CLEAR .

   Result	Proceed to
   DTC is not output	A
   DTC is output	B

B → See step   5 

A: Go to next step 

1. Turn the ignition switch off.
2. Check the combination meter. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .

   OK

   The combination meter is normal.

   HINT: 

   If troubleshooting has been carried out according to the Problem Symptoms Table, refer back to the table and proceed to the next step. Refer to PROBLEM SYMPTOMS TABLE .

NG → See step   6 

OK → REPLACE ABS & TRACTION ACTUATOR ASSEMBLY