Front Airbag Sensor: Removal: Removal

HINT: 

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

1. PRECAUTION 
   WARNING:

   Be sure to read the "PRECAUTION" thoroughly before servicing. Refer to PRECAUTION .

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
   WARNING:

   Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

3. REMOVE COOL AIR INTAKE DUCT SEAL  . Refer to REMOVAL - Step 1 .
4. REMOVE RADIATOR GRILLE SUB-ASSEMBLY  . Refer to REMOVAL - Step 2 .
5. REMOVE FRONT BUMPER ASSEMBLY  . Refer to REMOVAL - Step 3 .
6. REMOVE FRONT AIRBAG SENSOR 
   1. Disconnect the connector from the front airbag sensor (LH).
      Fig 1: View Of Front Airbag Sensor And Bolts

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the bolt and the front airbag sensor (LH).