Starter Relay Circuit: Procedure

CHECK DTC OUTPUT
1. Delete the DTCs. Refer to DTC CHECK / CLEAR .
2. Check for DTCs again.
  HINT:
  
  If the engine does not start, check for DTC B2273, B2275, B2278, B2284, B2285, B2287, B2288 and B2289. (For details, see the "DTC check and clear". Refer to DTC CHECK / CLEAR .)
  
  OK
  
  No DTC is output.
NG → GO TO DIAGNOSTIC TROUBLE CODE CHART

OK → GO TO Cranking Holding Function Circuit