FixVault
Home › Toyota › 2012 › Highlander Hybrid Limited › Repair and Diagnosis › Engine Performance › System › Engine Control System (Service Information) (Hybrid) › Crankshaft Position Sensor › Removal › Removal

Crankshaft Position Sensor: Removal: Removal

  1. REMOVE ELECTRIC INVERTER COMPRESSOR ASSEMBLY 

    Refer to REMOVAL

  2. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
      Fig 1: Identifying Crankshaft Position Sensor
      GTY295025Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and crankshaft position sensor.
About FixVault