FixVault
Home › Toyota › 2012 › Highlander Limited, FWD › Repair and Diagnosis › Engine Performance › System › Engine Control System (Service Information) (2GR-FE) › Crankshaft Position Sensor › Inspection › Inspection

Crankshaft Position Sensor: Inspection: Inspection

  1. INSPECT CRANKSHAFT POSITION SENSOR 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Identifying Crankshaft Position Sensor Connector Terminals
      GTY145184Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Temperature Specified Condition
      Cold 1630 to 2740 Ω
      Hot 2065 to 3225 Ω
      NOTE:
      • "Cold" and "Hot" mean the temperature of the coils themselves.
      • "Cold" is from -10°C (14°F) to 50°C (122°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).

      If the resistance is not as specified, replace the crankshaft position sensor.

About FixVault