FixVault
Home › Toyota › 2012 › Matrix Base, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 36 (Lighting System (Exterior) (Service Information)) › Headlight Assembly › Installation › Installation

Headlight Assembly: Installation: Installation

WARNING: This page is about a different car, the 2011 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL HEADLIGHT ASSEMBLY 
    1. Connect each connector.
    2. Engage the claw.
    3. Install the headlight assembly with the 2 bolts and screw.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

  2. INSTALL FRONT BUMPER ASSEMBLY (for 2AZ-FE)  . Refer to INSTALLATION - Step 1
  3. INSTALL FRONT BUMPER ASSEMBLY (for 2ZR-FE)  . Refer to INSTALLATION - Step 2
  4. INSTALL NO. 4 ENGINE UNDER COVER (for 2AZ-FE)  . Refer to INSTALLATION - Step 3
  5. INSTALL RADIATOR GRILLE PROTECTOR  . Refer to INSTALLATION - Step 4
  6. ADJUST HEADLIGHT AIMING 

    Refer to ADJUSTMENT 

  7. ADJUST FOG LIGHT AIMING (w/ Fog Light) 

    Refer to ADJUSTMENT 

About FixVault