FixVault
Home › Toyota › 2012 › Prius Four › Repair and Diagnosis › Restraints › Restraints Control Systems › Pre-Collision System (Except Plug-In) (Service Information) › Pre-Collision Brake Cancel Switch › Removal › Removal

Pre-Collision Brake Cancel Switch: Removal: Removal

  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  . Refer to REMOVAL - Step 19
  2. REMOVE PRE-COLLISION SYSTEM CANCEL SWITCH ASSEMBLY 
    1. Disengage the 2 claws and remove the pre-collision system cancel switch assembly.
      Fig 1: Locating Pre-Collision System Cancel Switch Assembly Claws
      GTY212308Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault