FixVault
Home › Toyota › 2012 › Prius Plug-in › Repair and Diagnosis › External Pages › Different variant/trim › Section 73 (Cruise Control System (Except Plug-In) (Diagnostics - Introduction)) › Cruise Control System › DTC Check / Clear › DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Tune the Techstream on.
    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Read the DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Clear the DTCs.
About FixVault