Charge Indicator: Installation: Installation

INSTALL INDICATOR LAMP ASSEMBLY
1. Install the indicator lamp with the 3 screws.
2. Connect the connector.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH . Refer to INSTALLATION - Step 18
INSTALL TONNEAU COVER HOLDER CAP (for RH Side)
HINT:

Use the same procedure described for the LH side. Refer to INSTALLATION - Step 15 .
INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)
HINT:

Use the same procedure described for the LH side. Refer to INSTALLATION - Step 16 .
INSTALL REAR SIDE SEAT BACK ASSEMBLY RH . Refer to INSTALLATION - Step 5
INSTALL REAR SEAT CUSHION ASSEMBLY . Refer to INSTALLATION - Step 7
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH . Refer to INSTALLATION - Step 47
INSTALL REAR DOOR SCUFF PLATE RH
HINT:

Use the same procedure described for the LH side. Refer to INSTALLATION - Step 38 .
INSTALL REAR DECK TRIM COVER . Refer to INSTALLATION - Step 21
INSTALL DECK TRIM SERVICE HOLE COVER . Refer to INSTALLATION - Step 22
INSTALL REAR NO. 1 FLOOR BOARD . Refer to INSTALLATION - Step 23
INSTALL REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY . Refer to INSTALLATION - Step 24
INSTALL REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY . Refer to INSTALLATION - Step 25
INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) . Refer to INSTALLATION - Step 28
INSTALL DECK FLOOR BOX LH
HINT:

Use the same procedure described for the RH side.
INSTALL REAR NO. 4 FLOOR BOARD SUB-ASSEMBLY . Refer to INSTALLATION - Step 27
INSTALL DECK FLOOR BOX RH . Refer to INSTALLATION - Step 54
INSTALL REAR NO. 3 FLOOR BOARD . Refer to INSTALLATION - Step 55
INSTALL REAR NO. 2 FLOOR BOARD . Refer to INSTALLATION - Step 56