FixVault
Home › Toyota › 2012 › Prius Two › Repair and Diagnosis › Engine Performance › System › Engine Control System (Except Plug-In) (Service Information) › Knock Sensor › Removal › Removal

Knock Sensor: Removal: Removal

  1. REMOVE INTAKE MANIFOLD 
    1. Remove the intake manifold. Refer to REMOVAL .
  2. REMOVE KNOCK SENSOR 
    1. Disconnect the knock sensor connector.
    2. Remove the bolt and remove the knock sensor.
      Fig 1: Identifying Knock Sensor, Connector & Bolt
      GTY227208Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault