Service Data
| Fuel pressure | Standard fuel pressure | 304 to 343 kPa (3.1 to 3.5 kgf/cm2 , 44 to 50 psi) | ||
| at fuel pressure remains for 5 minutes after engine has stopped | 147 kPa (1.5 kgf/cm2 , 21 psi) or more | |||
| Fuel injector | Standard Resistance 1 - 2 |
11.6 to 12.4 Ω at 20°C (68°F) | ||
| Injection volume | 76 to 92 cm3 (4.6 to 5.6 cu in.) per 15 seconds | |||
| Difference between each injector | 16 cm3 (1.0 cu in.) or less | |||
| Fuel drop | 1 drop or less in 35 minutes | |||
| Fuel suction with pump and gauge tube assembly | Standard Resistance 4 - 5 |
0.2 to 3.0 Ω at 20°C (68°F) | ||
| Fuel pump resistor | Standard Resistance 1 - 2 |
0.30 to 0.34 Ω | ||
| Fuel sender gauge assembly | Tester Connection | Float Level | Float Position (mm (in.)) | Standard resistance |
| 1 - 2 | F | 114.2 (4.496) | 13.5 to 16.5 Ω | |
| 1/2 | 66.1 (2.602) | 202 to 223 Ω | ||
| E | 0 (0) | 405.5 to 414.5 Ω | ||
| Compression spring | Center exhaust pipe assembly x Front exhaust pipe assembly | Minimum length : 38.86 mm (1.5299 in.) | ||