FixVault
Home › Toyota › 2012 › Tacoma Base, 2D Pickup, RWD, Standard Trans › Repair and Diagnosis › Brakes › Traction Control › Brake Control System (Service Information) › VSC Off Switch › Installation › Installation

VSC Off Switch: Installation: Installation

  1. INSTALL VSC OFF SWITCH 
    1. Attach the 2 claws to install the VSC off switch into the lower No. 1 instrument panel finish panel.
      Fig 1: Identifying VSC OFF Switch
      GTY205351Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the VSC off switch connector.
  2. INSTALL INSTRUMENT PANEL BOX  . Refer to INSTALLATION - Step 2
About FixVault