FixVault
Home › Toyota › 2012 › Tacoma X-Runner › Repair and Diagnosis › Brakes › Traction Control › Brake Control System (Service Information) › Skid Control Buzzer › Installation › Installation

Skid Control Buzzer: Installation: Installation

  1. INSTALL SKID CONTROL BUZZER ASSEMBLY 
    1. Connect the buzzer connector.
      Fig 1: Identifying Skid Control Buzzer Clamp
      GTY205399Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Securely connect the connector.

    2. Attach the clamp to install the buzzer.
      NOTE:
      • Securely insert the clamp into the bracket of the instrument panel reinforcement.
      • If the buzzer is dropped, replace it.
  2. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY  . Refer to INSTALLATION - Step 13
  3. INSTALL LOWER INSTRUMENT PANEL LH  . Refer to INSTALLATION - Step 14
  4. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH  . Refer to INSTALLATION - Step 15
  5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY  . Refer to INSTALLATION - Step 16
  6. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 17
  7. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 19
  8. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL  . Refer to INSTALLATION - Step 20
  9. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY  . Refer to REASSEMBLY - Step 2
  10. INSTALL RADIO RECEIVER ASSEMBLY  . Refer to INSTALLATION - Step 4
  11. INSTALL AIR CONDITIONING CONTROL ASSEMBLY  . Refer to INSTALLATION - Step 1
  12. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Bench Seat Type)  . Refer to INSTALLATION - Step 25
  13. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Bench Seat Type)  . Refer to INSTALLATION - Step 26
  14. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Separate Seat Type)  . Refer to INSTALLATION - Step 27
  15. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Separate Seat Type)  . Refer to INSTALLATION - Step 28
  16. INSTALL INSTRUMENT PANEL CUP HOLDER TRAY (for Automatic Transmission on Separate Seat Type)  . Refer to INSTALLATION - Step 29
  17. INSTALL REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type)  . Refer to INSTALLATION - Step 30
  18. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission on Separate Seat Type)  . Refer to INSTALLATION - Step 31
  19. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type)  . Refer to INSTALLATION - Step 32
  20. INSTALL INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake)  . Refer to INSTALLATION - Step 33
  21. INSTALL INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake)  . Refer to INSTALLATION - Step 34
  22. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH 
  23. INSTALL COWL SIDE TRIM BOARD LH (for Regular Cab)  . Refer to INSTALLATION - Step 43
  24. INSTALL COWL SIDE TRIM BOARD LH (for Access Cab)  . Refer to INSTALLATION - Step 52
  25. INSTALL COWL SIDE TRIM BOARD LH (for Double Cab)  . Refer to INSTALLATION - Step 53
  26. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab)  . Refer to INSTALLATION - Step 45
  27. INSTALL FRONT DOOR SCUFF PLATE LH (for Access Cab)  . Refer to INSTALLATION - Step 54
  28. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab)  . Refer to INSTALLATION - Step 55
  29. INSTALL FRONT FLOOR FOOTREST  . Refer to INSTALLATION - Step 1
  30. CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

About FixVault