Driving Support Switch Control Ecu: Installation: Installation

INSTALL DRIVING SUPPORT SWITCH CONTROL ECU
1. Install the driving support switch control ECU with the nut.
  Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf)
INSTALL MULTI-MEDIA INTERFACE ECU ASSEMBLY
1. Install the multi-media interface ECU assembly with the 2 nuts.
  Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf)
2. Connect the 3 connectors and clamp.
INSTALL RADIO RECEIVER ASSEMBLY
Refer to INSTALLATION