FixVault
Home › Toyota › 2013 › FJ Cruiser RWD › Repair and Diagnosis (Single Page) › Engine Performance › Engine Control Systems › Engine Control System (Service Information) › Camshaft Oil Control Valve › Removal › Removal

Camshaft Oil Control Valve: Removal: Removal

  1. REMOVE INTAKE AIR SURGE TANK 
    1. Remove the intake air surge tank. Refer to REMOVAL .
  2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 1) 
    1. Disconnect the oil control valve connector.
      Fig 1: Identifying Camshaft Timing Oil Control Valve Connector
      GTY173082Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and oil control valve.
    3. Remove the O-ring from the oil control valve.
  3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 2) 
    1. Disconnect the oil control valve connector.
      Fig 2: Identifying Camshaft Timing Oil Control Valve Assembly (For Intake Side Of Bank 2)
      GTY189708Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and oil control valve.
    3. Remove the O-ring from the oil control valve.
  4. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 1) 
    1. Disconnect the oil control valve connector.
      Fig 3: Identifying Camshaft Timing Oil Control Valve Connector
      GTY173084Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and oil control valve.
    3. Remove the O-ring from the oil control valve.
  5. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 2) 
    1. Disconnect the oil control valve connector.
      Fig 4: Identifying Camshaft Timing Oil Control Valve Connector
      GTY174153Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and oil control valve.
    3. Remove the O-ring from the oil control valve.
About FixVault