FixVault
Home › Toyota › 2013 › Matrix Base, Standard Trans › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (2ZR-FE) (Service Information) › Mass Air Flow Meter › Removal › Removal

Mass Air Flow Meter: Removal: Removal

  1. REMOVE MASS AIR FLOW METER 
    1. Disconnect the mass air flow meter connector.
      Fig 1: Locating Screws And Mass Air Flow Meter
      GTY194540Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws and the mass air flow meter.
About FixVault