Window Defogger Wire: Repair: Repair

REPAIR REAR WINDOW DEFOGGER WIRE (BACK DOOR GLASS)

Fig 1: Cleaning Broken Wire Tips With Grease
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Clean the broken wire tips with a grease, wax and silicone remover.
2. Place masking tape along both sides of the wire.
3. Thoroughly mix the repair agent (Dupont paste No. 4817 or equivalent).
  
  Fig 2: Applying Small Amount Of Agent To Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Using a fine tip brush, apply a small amount of the agent to the wire.
5. After a few minutes, remove the masking tape.
  NOTE:
  Do not use the rear window defogger for at least 24 hours after performing the repair.