Heated Oxygen Sensor: Inspection: Inspection

INSPECT HEATED OXYGEN SENSOR

Fig 1: Inspecting Heated Oxygen Sensor (Without Harness Connected) & Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

TEXT IN ILLUSTRATION

*1	Component without harness connected (Heated Oxygen Sensor)

Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection	Condition	Specified Condition
(HT) - (+B)	20°C (68°F)	11 to 16 Ω
(HT) - (E)	-	10 kΩ or higher

If the result is not as specified, replace the heated oxygen sensor.