FixVault
Home › Toyota › 2013 › Prius V › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (Service Information) › Knock Sensor › Removal › Removal

Knock Sensor: Removal: Removal

  1. REMOVE INTAKE MANIFOLD 

    Refer to REMOVAL

  2. REMOVE KNOCK SENSOR 
    1. Disconnect the knock sensor connector.
    2. Remove the bolt and knock sensor.
      Fig 1: Identifying Knock Sensor, Connector & Bolt
      GTY227208Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault