FixVault
Home › Toyota › 2013 › Sienna L › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control System (Service Information) › Cruise Control Main Switch › Installation › Installation

Cruise Control Main Switch: Installation: Installation

  1. INSTALL CRUISE CONTROL MAIN SWITCH 
    1. Install the cruise control main switch with the 2 screws.
    2. Connect the connector.
  2. INSTALL STEERING PAD  . Refer to INSTALLATION - Step 1
  3. INSTALL LOWER NO. 3 STEERING WHEEL COVER  . Refer to INSTALLATION - Step 2
  4. INSTALL LOWER NO. 2 STEERING WHEEL COVER  . Refer to INSTALLATION - Step 3
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .

  6. INSPECT STEERING PAD  . Refer to INSTALLATION - Step 5
  7. INSPECT SRS WARNING LIGHT 

    Refer to CHECK MODE PROCEDURE

About FixVault