Engine Coolant Temperature Sensor: Installation: Installation

1. Install the engine coolant temperature sensor through a new gasket.
   Fig 1: Installing Engine Coolant Temperature Sensor With SST

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   TEXT IN ILLUSTRATION
   
   

   *a	Fulcrum Length 25 mm
   *b	Fulcrum Length 180 mm

   • SST: 09205-76030 

   without SST 

   Torque: 20 N*m (200 kgf*cm, 14 ft.*lbf) 

   with SST 

   Torque: 17 N*m (175 kgf*cm, 13 ft.*lbf) 

   NOTE:

   • The "with SST" torque value is effective when using SST with a fulcrum length of 25 mm (0.984 in.) and a torque wrench with a fulcrum length of 180 mm (7.09 in.). Refer to PRECAUTION .
   • The "with SST" torque value is effective when SST is parallel to the torque wrench.
2. Connect the engine coolant temperature sensor connector.

Refer to INSTALLATION