FixVault
Home › Toyota › 2013 › Yaris SE, Standard Trans › Repair and Diagnosis › Engine Performance › System › Engine Control System (Hatchback) (Diagnostics - Introduction) › SFI SYSTEM (for Hatchback) › Precaution › Precaution

SFI SYSTEM (for Hatchback): Precaution: Precaution

  1. INITIALIZATION 
    NOTE:
    • If the ECM is replaced, register the ECU communication ID for Engine Immobiliser System. Refer to REGISTRATION .
    • Perform the Reset Memory (AT initialization) when replacing the automatic transaxle assembly, engine assembly or ECM. Refer to INITIALIZATION .
    • Perform Registration (VIN registration) when replacing the ECM. Refer to REGISTRATION .

    HINT: 

    • The engine learned value cannot be reset by disconnecting the battery negative (-) terminal or removing the EFI MAIN and ETCS fuses.
    • Refer to Initialization to perform Learning Value Reset and idle learning. Refer to INITIALIZATION .
  2. WHEN USING TECHSTREAM 
    WARNING:

    Observe the following items for safety reasons:

    • Before using the Techstream, read the instruction manual.
    • Prevent the Techstream cable from being caught on the pedals, shift lever or steering wheel when driving with the Techstream connected to the vehicle.
    • When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One is for driving the vehicle, and the other operates the Techstream.
About FixVault