FixVault
Home › Toyota › 2015 › Prius Two › Repair and Diagnosis › External Pages › Different variant/trim › Section 72 (Plug-In Charge Control System - Diagnostic Codes & Circuit Tests (Plug-In)) › Plug-In Charge Control System › DTC P060B-134: Internal Control Module A/D Processing Performance; DTC P060B-135: Internal Control Module A/D Processing Performance; DTC P060B-570: Internal Control Module A/D Processing Performance; DTC P060B-649: Internal Control Module A/D Processing Performance [08/2014 - ] › Inspection Procedure

Inspection Procedure

WARNING: This page is about a different variant/trim than selected.

HINT: 

After the repair, perform the following procedure and check if the same DTC is output.

  1. Turn the power switch off. Turn the power switch on (IG) and wait for 10 seconds or more. (*1)
  2. Turn the power switch off and wait for 30 seconds or more. (*2)
  3. Repeat steps (*1) and (*2) 3 times.
About FixVault