Installation [11/2015 - 12/2018]: Procedure

INSTALL FUEL PRESSURE REGULATOR ASSEMBLY
1. Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.
2. Install the fuel pressure regulator assembly to the fuel filter.
  NOTE:
  Make sure that the O-rings are not cut or pinched during installation.
INSTALL FUEL PUMP WITH FILTER ASSEMBLY
See step 1
INSTALL FUEL SENDER GAUGE ASSEMBLY
See step 1
INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
Refer to INSTALLATION [11/2015 - 12/2018]