FixVault
Home › Toyota › 2016 › Sienna LE, AWD › Repair and Diagnosis › Brakes › Traction Control › Brake Control System (Service Information) › VSC Off Switch › Installation [12/2015 - ] › Procedure

Installation [12/2015 - ]: Procedure

  1. INSTALL VSC OFF SWITCH 
    1. Engage the 2 claws and install the VSC OFF switch.
  2. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 41 [12/2015 - 11/2017] Refer to PROCEDURE - Step 40 [11/2017 - ]

  3. INSTALL INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 43 [12/2015 - 11/2017] Refer to PROCEDURE - Step 42 [11/2017 - ]

  4. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH 

    Refer to PROCEDURE - Step 44 [12/2015 - 11/2017] Refer to PROCEDURE - Step 43 [11/2017 - ]

  5. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL 

    Refer to PROCEDURE - Step 2

  6. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 46 [12/2015 - 11/2017] Refer to PROCEDURE - Step 45 [11/2017 - ]

  7. CHECK FOR WARNING LIGHT AND INDICATOR LIGHT 

    (Refer to TEST MODE PROCEDURE [12/2015 - 11/2017] Refer to TEST MODE PROCEDURE [11/2017 - ] )

About FixVault