FixVault
Home › Toyota › 2017 › 4Runner TRD Pro › Repair and Diagnosis › Brakes › Traction Control › Brake Control System - Service Information › Downhill Assist Control Switch › Removal [08/2015 - ] › Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE DRIVE MONITOR SWITCH 

    See step  1

  2. REMOVE MAP LIGHT ASSEMBLY 

    See step  2

  3. REMOVE DOWNHILL ASSIST CONTROL SWITCH 
    1. Disconnect the 2 connectors.
      GTY712080Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a screwdriver, detach the 2 claws and remove the downhill assist control switch from the map light assembly.
      GTY232035Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Tape the screwdriver tip before use.

About FixVault