FixVault
Home › Toyota › 2017 › 86 Base, Automatic Trans › Repair and Diagnosis › Body & Frame › Windows › Power Window Control System - Diagnostics - Introduction › Power Window Control System › DTC Check / Clear [06/2016 - ] › DTC Check / Clear [06/2016 - ]

DTC Check / Clear [06/2016 - ]

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Master switch / Trouble Codes.
    5. Check the details of the DTC(s) (Refer to DIAGNOSTIC TROUBLE CODE CHART [06/2016 - ] ).
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Master switch / Trouble Codes.
    5. Clear the DTCs (Refer to DIAGNOSTIC TROUBLE CODE CHART [06/2016 - ] ).
About FixVault