Inspection [06/2016 - ]: Procedure

INSPECT FUEL PRESSURE SENSOR

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Check the fuel pressure sensor output voltage.

Measure the voltage according to the value(s) in the table below.

Standard Voltage

Tester Connection	Condition	Specified Condition
3 (VOUT1) - 2 (GND)	Apply 5 V between terminals 4 (VCC) and 2 (GND)	Approximately 0.5 V

TEXT IN ILLUSTRATION

*a	Component without harness connected (Fuel Pressure Sensor)

NOTE:

Be careful when connecting the leads, as the fuel pressure sensor may be damaged if the leads are connected to the wrong terminals.
Do not apply a voltage of 6 V or more to the terminals 4 (VCC) and 2 (GND).

HINT:

If a stable power supply is not available, use 4 1.2 V nickel-metal hydride batteries, etc.

If the resistance is not as specified, replace the fuel pressure sensor.