FixVault
Home › Toyota › 2017 › 86 Base, Automatic Trans › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (Service Information) › Accelerator Pedal › Removal [06/2016 - ] › Procedure

Removal [06/2016 - ]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Refer to PROCEDURE - Step 1

  2. REMOVE ACCELERATOR PEDAL ROD STOPPER 
    1. Remove the accelerator pedal rod stopper.
      GTY393112Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE ACCELERATOR PEDAL ROD COVER 
    1. Disengage the clip, and remove the accelerator pedal rod cover.
      GTY391526Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE ACCELERATOR PEDAL ASSEMBLY 
    GTY388987Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the accelerator pedal assembly connector.
    2. Remove the 2 nuts and the accelerator pedal assembly.
About FixVault