FixVault
Home › Toyota › 2017 › 86 Base, Automatic Trans › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (Service Information) › Mass Air Flow Meter › Installation [06/2016 - ] › Procedure

Installation [06/2016 - ]: Procedure

  1. INSTALL MASS AIR FLOW METER 
    1. Install the mass air flow meter with the 2 screws.

      Torque: 1.0 N*m (10 kgf*cm, 9 in.*lbf) 

    2. Connect the mass air flow meter.
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Refer to PROCEDURE - Step 3

About FixVault