FixVault
Home › Toyota › 2017 › Prius Prime Advanced › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System - Service Information › Knock Sensor › Removal [09/2016 - ] › Procedure

Removal [09/2016 - ]: Procedure

  1. REMOVE INTAKE MANIFOLD 

    Refer to REMOVAL [09/2016 - ]

  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the knock control sensor connector.
      GTY550056Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and knock control sensor from the cylinder block sub-assembly.
      NOTE:

      If the knock control sensor has been struck or dropped, replace it.

About FixVault