FixVault
Home › Toyota › 2017 › Sienna LE, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System [2GR-FKS] (Service Information) › Knock Sensor › Removal [08/2016 - ] › Procedure

Removal [08/2016 - ]: Procedure

  1. REMOVE FUEL DELIVERY PIPE 

    Refer to REMOVAL [08/2016 - ]

  2. REMOVE KNOCK SENSOR 
    1. Disconnect the 2 knock sensor connectors.
      GTY644768Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for Bank 1
      *B for Bank 2
    2. Remove the 2 bolts and 2 knock sensors from the cylinder block sub-assembly.
      NOTE:

      If a knock sensor has been struck or dropped, replace it.

About FixVault