DTC U3000-00: Control Module; DTC U3000-64: Control Module Signal Plausibility Failure: Procedure

RECORD CONFIGURATION DATA

Switch the ignition ON (engine off).

Result

Proceed to
NEXT

Result: 1

See step 2

VERIFY DTC TROUBLESHOOTING COMPLETED

Using the Techstream, clear the DTC from the laser sensor.
Refer to DTC CHECK / CLEAR

Chassis > Smart City Brake Support > Clear DTCs
Using the Techstream, perform the laser sensor DTC inspection.
Refer to DTC CHECK / CLEAR

Chassis > Smart City Brake Support > Trouble Codes

Is the same DTC present?

Result

Proceed to
Yes
No

Result: 2

Yes

See step 4

Result: 1

See step 3

VERIFY NO DTC IS PRESENT

Are any DTCs present?

Result

Proceed to
Yes
No

Result: 1

DTC TROUBLESHOOTING COMPLETED.

Result: 2

Yes

GO TO APPLICABLE DTC INSPECTION.. Refer to DIAGNOSTIC TROUBLE CODE CHART

REPEAT THE INSPECTION FROM STEP 1.

If the malfunction recurs, replace the laser sensor, then go to the next step.

Refer to REMOVAL

Result

Proceed to
NEXT

Result: 1

See step 3