FixVault
Home › Toyota › 2017 › Yaris iA Automatic Trans › Repair and Diagnosis (Single Page) › Accessories & Equipment › Entertainment Systems › Rear View Monitor System - Diagnostics - Introduction › Rear View Monitor System › Customize Parameters › Customize Parameters

Customize Parameters

  1. Pre-collision 
    1. Switch the ignition ON (engine off or on).
    2. Select [Settings] on the multi-display.
    3. Select [Safety] on the multi-display.
    4. Select an item name, and then select option.
      Display of multi-display Function Initial setting Settings Control module
      Smart City Brake Support The operation of pre-collision can be turned off. On On / Off Laser sensor
  2. Door Locks Systems 
    1. Switch the ignition ON (engine off or on).
    2. Select [Settings] on the multi-display.
    3. Select [Vehicle] on the multi-display.
    4. Select [Door Lock] on the multi-display.
    5. Select an item name, and then select option.
  3. Power Door Lock System 
    Display of multi-display Function Initial setting Settings Control module
    Auto Door Lock Mode Auto door lock function can be changed. Lock: When Driving, Unlock: IGN Off Off / Lock: When Driving, Unlock: In Park / Lock: When Driving / Lock: When Driving, Unlock: IGN Off / Lock: Shifting from Park / Lock: Shifting from Park, Unlock: In Park Main body ECU
    Unlock Mode 2-step unlocking system can be set. Once Driver's, Twice: All Doors Once: ALL Doors / Once Driver's, Twice: All Doors Main body ECU
    Reset Returns the setting content of the door lock system to the initial setting. No No / Yes
    • Engine stop and start ECU
    • Main body ECU
  4. Smart Key System 
    Display of multi-display Function Initial setting Settings Control module
    Keyless Lock Beep Volume The wireless door lock buzzer volume can be adjusted. Medium High / Medium / Low / Off Engine stop and start ECU
    Auto Relock Time The operation start time of the auto re-lock function can be changed. 60 seconds 30 seconds / 60 seconds / 90 seconds Engine stop and start ECU
    Walk Away Lock The out-of-area (reception area) type auto lock function can be set. Off Off / On Engine stop and start ECU
    Reset Returns the setting content of the door lock system to the initial setting. No No / Yes
    • Engine stop and start ECU
    • Main body ECU
  5. Wireless Door Lock System 
    Display of multi-display Function Initial setting Settings Control module
    Auto Relock Time The operation start time of the auto re-lock function can be changed. 60 seconds 30 seconds / 60 seconds / 90 seconds Engine stop and start ECU
    Reset Returns the setting content of the door lock system to the initial setting. No No / Yes
    • Engine stop and start ECU
    • Main body ECU
  6. Lighting Systems 
    1. Switch the ignition ON (engine off or on).
    2. Select [Settings] on the multi-display.
    3. Select [Vehicle] on the multi-display.
    4. Select [Lighting] on the multi-display.
    5. Select an item name, and then select option.
  7. Room light control system 
    Display of multi-display Function Initial setting Settings Control module
    Interior Light Timeout - Doors Open
    • The map light illumination time after a door is opened can be changed.
    • The luggage compartment room light illumination time after the trunk lid is opened can be changed.
    		 30 minutes 60 minutes / 30 minutes / 10 minutes Main body ECU
    Interior Light Timeout - Doors Closed The map light illumination time after all doors are closed can be changed. 15 seconds 60 seconds / 30 seconds / 15 seconds / 7.5 seconds Main body ECU
    Reset Returns the setting content of the lighting system to the initial setting. No No / Yes
    • Main body ECU
    • Combination meter
  8. Lights-on reminder warning alarm 
    Display of multi-display Function Initial setting Settings Control module
    Light On Reminder Vol The volume for the lights-on reminder warning alarm can be changed. Off High / Low / Off Combination meter
    Reset Returns the setting content of the lighting system to the initial setting. No No / Yes
    • Main body ECU
    • Combination meter
  9. DRL system 
    Display of multi-display Function Initial setting Settings Control module
    Daytime Running Lights The DRL system function can be set. On On / Off Main body ECU
    Reset Returns the setting content of the lighting system to the initial setting. No No / Yes
    • Main body ECU
    • Combination meter
  10. Auto light-off system 
    Display of multi-display Function Initial setting Settings Control module
    Headlight Off Timer The headlight emitted time of the auto light off timer can be changed. 30 seconds 120 seconds / 90 seconds / 60 seconds / 30 seconds / Off Main body ECU
    Reset Returns the setting content of the lighting system to the initial setting. No No / Yes
    • Main body ECU
    • Combination meter
  11. Coming home light system 
    Display of multi-display Function Initial setting Settings Control module
    Coming Home Lights Timer The coming home light system operation time can be switched. 30 seconds Off / 30 seconds / 60 seconds / 90 seconds / 120 seconds Main body ECU
    Reset Returns the setting content of the lighting system to the initial setting. No No / Yes
    • Main body ECU
    • Combination meter
  12. Leaving home light system 
    Display of multi-display Function Initial setting Settings Control module
    Leaving Home Lights The leaving home light system can be switched between operable and inoperable. On On / Off Main body ECU
    Reset Returns the setting content of the lighting system to the initial setting. No No / Yes
    • Main body ECU
    • Combination meter
  13. Turn Light System 
    1. Switch the ignition ON (engine off or on).
    2. Select [Settings] on the multi-display.
    3. Select [Vehicle] on the multi-display.
    4. Select [Turn] on the multi-display.
    5. Select an item name, and then select option.
      Display of multi-display Function Initial setting Settings Control module
      3-Flash Turn Signal The turn light system can be switched between operable and inoperable. On On / Off Main body ECU
      Turn Signal Volume The volume of the turn and hazard indicator alarm can be changed. High High / Low Combination meter
      Reset Returns the setting content of the turn light system to the initial setting. No No / Yes
      • Main body ECU
      • Combination meter
  14. Language 
    1. Switch the ignition ON (engine off or on).
    2. Select [Settings] on the multi-display.
    3. Select [System] on the multi-display.
    4. Select an item name, and then select option.
      Display of multi-display Function Initial setting Settings Control module
      Language The display language can be changed. US English US English / Spanish / Canadian French Navigation receiver
  15. Distance 
    1. Switch the ignition ON (engine off or on).
    2. Select [Settings] on the multi-display.
    3. Select [System] on the multi-display.
    4. Select an item name, and then select option.
      Display of multi-display Function Initial setting Settings Control module
      Distance The distance unit can be changed. Miles or km*1 Miles / km Combination meter

      *1 : The initial value differs depending on the market.

  16. Temperature 
    1. Switch the ignition ON (engine off or on).
    2. Select [Settings] on the multi-display.
    3. Select [System] on the multi-display.
    4. Select an item name, and then select option.
      Display of multi-display Function Initial setting Settings Control module
      Temp*1 The temperature unit can be changed. °F or °C*2 °F / °C Combination meter

      *1 : When the ambient temperature display is switched, the set A/C cabin temperature display is also changed.

      *2 : The initial value differs depending on the market.

  17. Fuel Economy Monitor 
    1. Switch the ignition ON (engine off or on).
    2. Select [Application] on the multi-display.
    3. Select [Fuel economy monitor] on the multi-display.
    4. Press the setting button on the menu screen.
    5. Select an item name, and then select option.
      Display of multi-display Function Initial setting Settings Control module
      Show Screen at Ignition Off The ending screen of the fuel monitor can be switched between display/non-display. On On / Off Navigation receiver
      Sync Average and Trip A The function which synchronizes the reset of the fuel reset and trip meters can be switched between on/off. On On / Off Navigation receiver
About FixVault