| Possible Causes |
- Door lock receiver malfunction
- Door control transmitter malfunction
- Open circuit in wiring harness between the following terminals:
- Door lock receiver terminal E30-1 and engine stop and start ECU terminal D4-9
- Door lock receiver terminal E30-2 and engine stop and start ECU terminal D4-21
- Engine stop and start ECU terminal D6-32 and ground
- Engine stop and start ECU terminal D4-13 and ground
- Connector poor contact or terminal damage
- Customer's mis-operation or misunderstanding
- Effect of non-standard equipment (any control unit with built-in micro computer such as radio set, mobile telephone, and TV)
|