FixVault
Home › Toyota › 2017 › Yaris iA Automatic Trans › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (Service Information) › Ignition Coil › Removal › Procedure

Ignition Coil: Removal: Procedure

  1. REMOVE IGNITION COIL 
    1. Disconnect the negative battery cable.

      Refer to REMOVAL

    2. Remove the plug hole plate.

      Refer to REMOVAL

    3. Remove the connector.
      GTY484511Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Connector
      *2 Ignition Coil
      N*m (kgf*cm, ft.*lbf): Specified torque
    4. Remove the ignition coil.
About FixVault