FixVault
Home › Toyota › 2017 › Yaris iA Automatic Trans › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (Service Information) › Mass Air Flow Meter › Removal › Procedure

Mass Air Flow Meter: Removal: Procedure

  1. REMOVE MASS AIR FLOW METER 
    1. Disconnect the negative battery cable.

      Refer to REMOVAL

    2. Disconnect the MAF sensor/IAT sensor No. 1 connector.
      GTY492132Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Screw *b Connector
      *c MAF Sensor/IAT Sensor No. 1 -  
    3. Remove the screws.
    4. Remove the MAF sensor/IAT sensor No. 1.
About FixVault