FixVault
Home › Toyota › 2017 › Yaris iA Automatic Trans › Repair and Diagnosis › General Information › Reset Procedures › Tire Pressure Monitor Systems › TPMS Reset Procedures › Initializing Tire Pressure Monitor System › Using The Scan Tool (Techstream)

Using The Scan Tool (Techstream)

  1. Park the vehicle on safe, level ground and adjust all four tire pressures to the specification while the tires are cold.
  2. Connect the Techstream to the DLC3.
  3. Turn the engine switch ON.
  4. Enter the following menus: Chassis / ABS/DSC/TCS / Utility / TPMS Reset.
  5. Perform the procedure according to the directions on the screen.
    NOTE: When the tire pressure warning system initialization is performed, learning initiates. Learning is completed by driving the vehicle for approx. 20 min.
About FixVault