FixVault
Home › Toyota › 2017 › Yaris iA Standard Trans › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (Service Information) › Spark Plug › Installation › Procedure

Spark Plug: Installation: Procedure

  1. INSTALL SPARK PLUG 
    1. Install the spark plugs using a plug-wrench.

      Torque: 17.5 N*m (178 kgf*cm, 13 ft.*lbf) 

    2. Install the ignition coils.

      Refer to INSTALLATION 

    3. Install the plug hole plate.

      Refer to INSTALLATION

    4. Connect the negative battery cable.

      Refer to INSTALLATION

About FixVault