FixVault
Home › Toyota › 2018 › Prius Prime Advanced › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System - Service Information › Crankshaft Position Sensor › Removal [09/2016 - ] › Procedure

Removal [09/2016 - ]: Procedure

  1. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
      GTY600060Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and crankshaft position sensor from the cylinder block sub-assembly.
      NOTE:

      If the crankshaft position sensor has been struck or dropped, replace it.

About FixVault