FixVault
Home › Toyota › 2018 › RAV4 XLE, AWD › Repair and Diagnosis › External Pages › Different car › Section 20 (Power Window Control System (Diagnostics - Introduction) (Electric)) › Power Window Control System › DTC Check / Clear › DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2013 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).

      Turn the Techstream on.

    3. Enter the following menus: Body Electrical / D-Door Motor / Trouble Codes.
    4. Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE CHART .
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / D-Door Motor / Trouble Codes.
    5. Clear the DTCs.
About FixVault