FixVault
Home › Toyota › 2019 › Prius LE AWD-e › Repair and Diagnosis › Steering › Steering Column › Steering Column - Service Information › Heated Steering Wheel Controller › Installation [12/2018 - ] › Procedure

Installation [12/2018 - ]: Procedure

  1. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY 
    1. Install the steering wheel heater control assembly to the lower steering wheel boss cover with the 2 screws.
      GTY696737Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector to the steering wheel heater control assembly.
    3. Engage the clamp.
    4. Engage the 6 claws and 4 pins to install the lower steering wheel boss cover to the steering wheel assembly.
      GTY574746Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL STEERING PAD SWITCH ASSEMBLY 

    See step  1

  3. INSTALL CRUISE CONTROL SWITCH WIRE 

    See step  4

  4. INSTALL CRUISE CONTROL MAIN SWITCH 

    Refer to PROCEDURE - Step 1

  5. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD 
  6. INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 7

  7. INSTALL STEERING WHEEL ASSEMBLY 

    See step  8

  8. CHECK STEERING WHEEL CENTER POINT 
  9. INSTALL HORN BUTTON ASSEMBLY 

    Refer to INSTALLATION [11/2015 - ]

About FixVault