FixVault
Home › Toyota › 2019 › RAV4 Hybrid XLE › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (A25A-FXS) - Service Information › Engine Coolant Temperature Sensor › Removal [11/2018 - 02/2019] › Procedure

Removal [11/2018 - 02/2019]: Procedure

  1. DRAIN ENGINE COOLANT 

    Refer to REPLACEMENT [11/2018 - 02/2019]

  2. REMOVE INVERTER WITH CONVERTER ASSEMBLY 

    Refer to REMOVAL [11/2018 - 02/2019]

  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the engine coolant temperature sensor connector.
      GTY868592Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the clip and engine coolant temperature sensor from the water outlet.
      NOTE:

      If the engine coolant temperature sensor has been struck or dropped, replace it.

      GTY868593Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault