FixVault
Home › Toyota › 2019 › RAV4 Hybrid XLE › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (A25A-FXS) - Service Information › Knock Sensor › Removal [11/2018 - 02/2019] › Procedure

Removal [11/2018 - 02/2019]: Procedure

  1. REMOVE INTAKE MANIFOLD 

    Refer to REMOVAL [11/2018 - 02/2019]

  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the knock control sensor connector.
      GTY868596Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and knock control sensor from the cylinder block sub-assembly.
      NOTE:

      If the knock control sensor has been struck or dropped, replace it.

About FixVault