FixVault
Home › Toyota › 2019 › Tacoma TRD Pro, Automatic Trans › Repair and Diagnosis › Brakes › Traction Control › Brake Control System (Service Information) › Front Speed Sensor › Removal [08/2015 - 11/2017] › Procedure

Removal [08/2015 - 11/2017]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE FRONT WHEEL 
  3. REMOVE FRONT SPEED SENSOR 
    GTY581255Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the speed sensor connector.
    2. Remove the bolt and front speed sensor.
      NOTE:
      • Do not attach any foreign matter to the sensor tip.
      • Ensure that no foreign matter enters the sensor installation part.
About FixVault