Installation [08/2019 - ]: Procedure

INSTALL PRE-COLLISION CITY BUZZER
1. Connect the connector.
2. Engage the clamp to install the pre-collision city buzzer.
  NOTE:
  If the pre-collision city buzzer has been struck or dropped, replace it with a new one.
  
  HINT:
  
  Make sure to install the pre-collision city buzzer in the correct direction.
INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
Refer to INSTALLATION [08/2019 - 08/2022] , or refer to INSTALLATION [08/2022 - ]